Mike@ProsportAuto wrote:Hi Dave,
Did you have any luck with your Project Mu kit?
I'm the NZ Agent for ENDLESS Brakes from Japan, I'd be happy to help out and see what we can do for your setup if you like!
Cheers, Mike
mike@prosportauto.co.nz
Unfortunately no word back that was good. They have an GS300 kit that will fit the rear only and no real advances on the front according to Nick at NST but the issue is the brackets. I have a guy here in Adelaide (sorry should have clarified that I'm not in NZ anymore) that can make up the brackets and the such.
I have been searching and hunting around I can get the pad and rotor upgrades from project mu thats no issue its just the full caliper kit that I'm after. Due to fitting a 2jzgte into the car later on I need the clamping power of a 4/2 or 6/4 combo but after seeing the car in Sydney (still at the importers with compliance issues) it looks to already have the 4/2 set up on it already. There was 2 jzx110's there and my calipers where considerably bigger so can only assume they are the 4/2 jza80 set up.
But Mike if you have any information on a full endless kit then let me know I'm all ears on that front for sure.
Dave it could be difficult to have all your parts lined up ready to go and expect it all to go on with no dramas. For example I changed rotor sizes and calipers twice before I figured out what fitted.
And the brackets had to have a lot of thought go into them. Hey even when you are told a certain size wheel will clear, dont believe it until you have tried it yourself. Im sure if you take it a bit slower you will achieve a better result.
I know there will be issues with fitting but I'm trying to get a kit together with the least amount of issues with regards to fitting so that way people can know what can work apart from the standard Supra 4/2 set up, they are a great kit but there are better available nowadays. As for the brake/caliper/disc/wheel clearance I'm not too concerned about that the Yoko's will fit a rather large brake and have very good caliper clearance
On another tack the other option if Endless, Brembo or Project Mu have issues with kits is the Grex kit from Greddy. Apparently they are a direct bolt on, but would prefer Endless over the rest and Mu second up, have had both on my JZA80's and were alot better than most without the 12-14k price tag of the GT Brembo kits