Altezza lsd. Will it fit?
A01B 4.1 Torsen LSD, will it fit my jzx100?
Altezza lsd. Will it fit?
Moderator: PowderJZX
Re: Altezza lsd. Will it fit?
Pretty sure the altezza have a 7.5 diff not an 8?
I am no expert but I don't think it will and shaft size will differ too.
Take that as a view/belief of a complete newb.
I am no expert but I don't think it will and shaft size will differ too.
Take that as a view/belief of a complete newb.
Re: Altezza lsd. Will it fit?
Is your JZX100 factory turbo?
Philip
Phone: 021647974
Email: philip_huynh@yahoo.com
http://jzx100chaser.wordpress.com/
http://stylishtuningshop.wordpress.com/
Phone: 021647974
Email: philip_huynh@yahoo.com
http://jzx100chaser.wordpress.com/
http://stylishtuningshop.wordpress.com/
Re: Altezza lsd. Will it fit?
non turbo factory and still non turbo, yes altezza crown wheel is 7.5inch
Re: Altezza lsd. Will it fit?
hmmm, i should fit, i think only the turbo ones has the 8" crown
Re: Altezza lsd. Will it fit?
some of the auto stuff roll the same centres
SXE10, GXE10, JCE15W · GXE10W
2JZ-GE、1G-FE 2JZ-GE, 1G-FE
= trd lsd 41301-se100
JZX90/JZX100 (4A / T cars) · 105 1JZ-GE
= trd lsd 41301-se100
clutch type lsd
2jzge and 1jzgte x90s and 100s have different lsd centers same with 3sge sxe10 tezzas ( i think )
SXE10, GXE10, JCE15W · GXE10W
2JZ-GE、1G-FE 2JZ-GE, 1G-FE
= trd lsd 41301-se100
JZX90/JZX100 (4A / T cars) · 105 1JZ-GE
= trd lsd 41301-se100
clutch type lsd
2jzge and 1jzgte x90s and 100s have different lsd centers same with 3sge sxe10 tezzas ( i think )
curb |kərb| kerb
noun
1 a stone or concrete edging to a street or path.
2 a check or restraint on something
3 a concrete construction used to help rotate your car
4 a tempting shortcut
noun
1 a stone or concrete edging to a street or path.
2 a check or restraint on something
3 a concrete construction used to help rotate your car
4 a tempting shortcut
Re: Altezza lsd. Will it fit?
so just to clarify, i have a jzx100 avante 1jzge auto, what factory altezza should i go for, coz im sick of this single spinner, its the only vehicle i own with an open diff, i remember why i hate them!! got to get it sorted, let me know what will fit, part numbers etc would be awsome. cheersFLAWLES wrote:some of the auto stuff roll the same centres
SXE10, GXE10, JCE15W · GXE10W
2JZ-GE、1G-FE 2JZ-GE, 1G-FE
= trd lsd 41301-se100
JZX90/JZX100 (4A / T cars) · 105 1JZ-GE
= trd lsd 41301-se100
clutch type lsd
2jzge and 1jzgte x90s and 100s have different lsd centers same with 3sge sxe10 tezzas ( i think )
jzx = yes........ anything else = no
╭∩╮(︶︿︶)╭∩╮
╭∩╮(︶︿︶)╭∩╮
Re: Altezza lsd. Will it fit?
Throw me your chassis/frame number and I can give you a definite answer.
The 5AT non turbos (gated shifter) ones still use the 8.0" diff centre, the 4AT non turbos have the 7.5" centre.
Either way you'd need to swap just the centre, you wouldn't be able to use the 4.1:1 crowngear with your current pinion unless you have the complete diff head which (if it is the same A-Series 7.5" centre) should bolt in.
Check on your chassis tag, if it starts with a Bxxx it's the 8.0", if it starts with Axxx, it's the 7.5" diff.
Might have a shimmed up torsen A01B kicking around in a few weeks if yours turns out to be the 7.5" centre.
The 5AT non turbos (gated shifter) ones still use the 8.0" diff centre, the 4AT non turbos have the 7.5" centre.
Either way you'd need to swap just the centre, you wouldn't be able to use the 4.1:1 crowngear with your current pinion unless you have the complete diff head which (if it is the same A-Series 7.5" centre) should bolt in.
Check on your chassis tag, if it starts with a Bxxx it's the 8.0", if it starts with Axxx, it's the 7.5" diff.
Might have a shimmed up torsen A01B kicking around in a few weeks if yours turns out to be the 7.5" centre.
Re: Altezza lsd. Will it fit?
The altezza torsen lsd unit will fit into the gx90/100 diffheads. They are the smaller ones with 4 bolt driveshafts from memory. Pretty sure they wont work on the small & large 6 bolt heads though.
Brendan,
Convert Ltd/Niteparts NZ
Convert Ltd/Niteparts NZ
Re: Altezza lsd. Will it fit?
ok cool, yeah mine runs the a340 trans, (non gated) so it should be the 7.5'' diff.
could be keen on that shimmed a01b diff, is it just the centre, or the whole assy?
could be keen on that shimmed a01b diff, is it just the centre, or the whole assy?
jzx = yes........ anything else = no
╭∩╮(︶︿︶)╭∩╮
╭∩╮(︶︿︶)╭∩╮