JZX NZ

Managed to secure 2 GENUINE Toyota bellhousings to bolt any W Series box to a 1JZ or 2JZ engine.

These even have the slave cylinder bolt holes tapped (unlike most non genuine need to be tapped)

Suits all W boxes such as:
W51, W52, W55, W56, W57, W58, W59

Onto all J series motors such as:
1JZGE 1JZGTE (including VVTI) 2JZGE 2JZGTE (including VVTI) 1JZFSE 2JZFSE

Toyota part number:
31111-22140

RRP: (ring any Toyota dealer to confirm!)
$1452.80+GST

To JZXNZ Members only:
$485.00 Including GST!

These will be offered first to JZXNZ members till the end of Feb, where if they are still here, will go onto Trademe.

Please read before posting or sending me a PM etc:
viewtopic.php?f=44&t=165

Pics

good price, considering aftermarket ones on trademe for $665!!!

Just FYI, these WONT bolt up to a W50 and ive never heard of a W51 or W52

Ahh yes that's right, thanks Ryan. Will NOT suit the W50 (AKA "steel-case").

The W51 and W52 were also a steel cased trans, now that I think about it, not 100% sure if this will bolt onto that either, definitely 100% W55 onwards though

W51 was found in the CE71 and CE72 - Early 1980s Japanese market Corollas
W52 was found in the YN57 - 1984 - 1988 2WD Hilux for the Aussie market

Oh ok, i thought the CE71/72s came with the W56. Ill take your word for it.

Anyway...... yea these wont bolt up to any of the steel case W boxs

Link to W # Boxes .

http://en.wikipedia.org/wiki/Toyota_W_transmission

Dads CE71 has a W56 in it

Pretty sure the W51/52 being oz market only will be different bellhousing pattern to W55 style.

Logan

All Gone !!

WOW!!!

Guess you'll have to get more in then!!