Starter motor

Bosozoku_GX71 · Post by **Bosozoku_GX71** » Fri Jul 08, 2011 10:34 am

Hey just curious. could i run a vvti starter motor on my non vvti engine? Just cause i cause potentially get one from pick a part.

ryanfels · Post by **ryanfels** » Fri Jul 08, 2011 2:31 pm

I have some 2jzge starter motors you can try if you need one

Jonno2002 · Post by **Jonno2002** » Fri Jul 08, 2011 7:36 pm

any jz starter will work

Bosozoku_GX71 · Post by **Bosozoku_GX71** » Fri Jul 08, 2011 8:08 pm

ryanfels wrote:I have some 2jzge starter motors you can try if you need one

Aw you legend yea mine us playing up, therefore decides it doesn't want to start at very inconvenient times.

Jonno2002 · Post by **Jonno2002** » Sat Jul 09, 2011 9:43 am

you could fix it, probly just needs contacts/plunger and/or brushes.

Bosozoku_GX71 · Post by **Bosozoku_GX71** » Sat Jul 09, 2011 4:04 pm

Jonno2002 wrote:you could fix it, probly just needs contacts/plunger and/or brushes.

Oh yea i might try that then. Needs a cambelt soon anyway so il probly just do it all at the same time.

ryanfels · Post by **ryanfels** » Mon Jul 11, 2011 7:47 am

Bosozoku_GX71 wrote:
ryanfels wrote:I have some 2jzge starter motors you can try if you need one
Aw you legend yea mine us playing up, therefore decides it doesn't want to start at very inconvenient times.

If you need one, let me know. My number is 0274246544

Ryan

Jonno2002 · Post by **Jonno2002** » Mon Jul 11, 2011 9:08 pm

Bosozoku_GX71 wrote:
Jonno2002 wrote:you could fix it, probly just needs contacts/plunger and/or brushes.
Oh yea i might try that then. Needs a cambelt soon anyway so il probly just do it all at the same time.

lol i havent changed a cambelt on any of my toys yet, the 1ggte has had the head off twice and just put the belt back on, even when i changed the cam/crank seals on the 1jzgte i just put the belt back, non-interference so i couldnt care less

Bosozoku_GX71 · Post by **Bosozoku_GX71** » Tue Jul 12, 2011 1:15 pm

[

Jonno2002 wrote:
Bosozoku_GX71 wrote:
Jonno2002 wrote:you could fix it, probly just needs contacts/plunger and/or brushes.
Oh yea i might try that then. Needs a cambelt soon anyway so il probly just do it all at the same time.
lol i havent changed a cambelt on any of my toys yet, the 1ggte has had the head off twice and just put the belt back on, even when i changed the cam/crank seals on the 1jzgte i just put the belt back, non-interference so i couldnt care less

]
hahaha in that case.

JZX NZ

Starter motor

Starter motor

Re: Starter motor

Re: Starter motor

Re: Starter motor

Re: Starter motor

Re: Starter motor

Re: Starter motor

Re: Starter motor

Re: Starter motor