Speed Cut!

If having a JZ engine just isnt enough...
Post Reply
im_oli
Member
Member
Posts: 112
Joined: Sun May 20, 2012 9:45 pm
Location: New Plymouth

Speed Cut!

Post by im_oli »

Is there an easy way to remove the speed cut from my JZX100 Tourer V ?

I'm interested in seeing just how tall the gears in my R154 are hahaha...

davealdworth
Member
Member
Posts: 283
Joined: Wed Nov 23, 2011 10:27 pm

Re: Speed Cut!

Post by davealdworth »


ch4sernz
Member
Member
Posts: 295
Joined: Sat Jan 22, 2011 10:26 pm
Location: Whangarei

Re: Speed Cut!

Post by ch4sernz »

You'll run out if power before you run out of gears!
I have seen 250 in fourth with revs left over...

User avatar
Jonno2002
Member
Member
Posts: 161
Joined: Fri May 27, 2011 2:29 pm
Location: New Plymouth
Contact:

Re: Speed Cut!

Post by Jonno2002 »

i just didntt connect the SPD wire to my ecus in both my cars, no worries about speed cut now.

might not be an option with the newer ecu's tho as it might bring up check engine light and not run right.

worth a shot anyway if you can find the SPD wire, just had a quick look and it seems its quite hard to find a jzx100 1jzgte pinout

User avatar
m989
Member
Member
Posts: 191
Joined: Tue Jan 17, 2012 6:07 pm

Re: Speed Cut!

Post by m989 »


im_oli
Member
Member
Posts: 112
Joined: Sun May 20, 2012 9:45 pm
Location: New Plymouth

Re: Speed Cut!

Post by im_oli »

Yup sussed it. It's a light green sorta snifter coloured wire. SP1 it's called. I just cut it and insulated each end and it's all good it has no CEL or anything. Good suss. Breezes past 190

Naaste
Member
Member
Posts: 24
Joined: Thu May 02, 2013 10:37 am

Re: Speed Cut!

Post by Naaste »

Mates x100 has seen 280kmph odd on his power fc and the speedo was reading 300kmph, thats with about 430hp atw though lol

Post Reply