JZX NZ

Apart from my 90Chaser V bought a 90Mark2 V for parts and hd to remove the aircon compressor , I wasnt expecting it to be that much of a PITA, I went straght for the compressor and found out as I worked and relised much later that the radiator fan deeded t be removed and also belt and the power steering pump too looked at internet diagrams and seems like I have removed every major bolt but the compressorstill wont budge !
 Please help only if you have done this before... 
What should I try next ?
 Does the compressor slide out or just come off like the pwer stering pump? 
Im just puzzled , is there a bolt that I missed? 
How come it wont budge still? 
Do I need some special puller type tool?

PLEASE HELP AS CAR MUST GET JUNKED SOON 
THANKS ahead!

Alex

Should just unbolt bro. I did mine on my JZA80 not long ago and on my spare 2jz (basically the same as the 1jz) just removed the hoses from the pump and undid the tension on the air con compressor mount and then undid the compressor. Came right out

I just recently took mine off. You have to take the power steering pump off to get the compressor off.

Heres the bolts holding it;





Hope this helps.

JZ14 wrote:I just recently took mine off. You have to take the power steering pump off to get the compressor off.

Heres the bolts holding it;





Hope this helps.

AWESOME BRO SUPER !!! THANK YOU!!!

Can anyone confirm pls ! I think the the vvti and old tt motor like mine have different compressors ?