My JZX110's

Area for JZX NZ members to show off their rides
User avatar
yakuza
Member
Member
Posts: 423
Joined: Thu Jul 19, 2012 12:33 pm
Location: Auckland

Re: My JZX110's

Post by yakuza »

davealdworth wrote:Yea I'm making the pipe about 6inches shorter and more direct to get it away from the wheel. That side of the pipe stays relatively warm because of the heat under the bonnet (soon to be fixed with the BN sports bonnet) and bugger all airflow goes over those pipes, hoping the new vertex kit will sort that out as I will also be running ducting to the brakes and radiator.

Don't know what the GTE 110's are like back in the NZ 20-30 degree summers but over here during summer we have the 40-50 degree days quiet often so keeping the car cool is the most important task. Although I doubt I'll even be driving it all that much over summer.

talking to a few 100 and 110 boys over here lately and the hardest issue is getting cold air into the engine bay on getting the hot out
Was it you on the JZXWORLD forums saying that it will cost $3000 for the BN bonnet?
dailydrivenJZX

Mob. 0211015933

davealdworth
Member
Member
Posts: 283
Joined: Wed Nov 23, 2011 10:27 pm

Re: My JZX110's

Post by davealdworth »

sure was. I emailed Jesse Streeter and it was going to be about 3.1k though him and import monster ended up getting me a deal for 2000

User avatar
yakuza
Member
Member
Posts: 423
Joined: Thu Jul 19, 2012 12:33 pm
Location: Auckland

Re: My JZX110's

Post by yakuza »

davealdworth wrote:sure was. I emailed Jesse Streeter and it was going to be about 3.1k though him and import monster ended up getting me a deal for 2000
3.1k is heaps. 2k is much better. What's it made out of? Carbon fibre?
dailydrivenJZX

Mob. 0211015933

JZ14
Member
Member
Posts: 166
Joined: Mon Apr 22, 2013 6:53 pm

Re: My JZX110's

Post by JZ14 »

Was it bran new through Import Monster?

I generally get things from Streeter for 15-30% cheaper than "mates rates" through local people here.. Maybe IM found a cheap new second hand one or something?

davealdworth
Member
Member
Posts: 283
Joined: Wed Nov 23, 2011 10:27 pm

Re: My JZX110's

Post by davealdworth »

is brand new from each jesse and import monster. Made of fibreglass. Here in aussie import monster is used a lot more just cause they are a hell of a lot bigger than Jesse

User avatar
yakuza
Member
Member
Posts: 423
Joined: Thu Jul 19, 2012 12:33 pm
Location: Auckland

Re: My JZX110's

Post by yakuza »

Did a little burnout/drift to test my torsen diff. Its really predictable and spins both wheels all the time. Here's a photo.

Image
dailydrivenJZX

Mob. 0211015933

ch4sernz
Member
Member
Posts: 295
Joined: Sat Jan 22, 2011 10:26 pm
Location: Whangarei

Re: My JZX110's

Post by ch4sernz »

Did you try switching back the other way?
I found mine would lock up awesome in first then when you switched or changed to second and feathered the throttle it would spin open

User avatar
yakuza
Member
Member
Posts: 423
Joined: Thu Jul 19, 2012 12:33 pm
Location: Auckland

Re: My JZX110's

Post by yakuza »

ch4sernz wrote:Did you try switching back the other way?
I found mine would lock up awesome in first then when you switched or changed to second and feathered the throttle it would spin open
Nah I didn't. I did a standing burnout and then did a drift while turning left. If I switched the other way I would've crashed into parked vehicles lol
dailydrivenJZX

Mob. 0211015933

davealdworth
Member
Member
Posts: 283
Joined: Wed Nov 23, 2011 10:27 pm

Re: My JZX110's

Post by davealdworth »

BURNOUT EVERYWHERE :lol:

User avatar
yakuza
Member
Member
Posts: 423
Joined: Thu Jul 19, 2012 12:33 pm
Location: Auckland

Re: My JZX110's

Post by yakuza »

davealdworth wrote:BURNOUT EVERYWHERE :lol:
Hahaha. Make a video of your car, wanna hear how it sounds
dailydrivenJZX

Mob. 0211015933

Post Reply