JZX100 Tourer V & 2JZ bits

Moderator: PowderJZX

nite b
Member
Member
Posts: 52
Joined: Mon Apr 11, 2011 3:38 pm
Location: N.Shore, Auckland

JZX100 Tourer V & 2JZ bits

Post by nite b »

Complete JZX100 Tourer V rear end including Dual diffmount subframe, Torsen LSD, big axles, swaybar, extra braces, big vented brakes. Also includes matching Tourer V big vented front brake kit.
$1200 lot

2JZGE turbo manifold $280

1JZGTE starter motor $140

440cc injectors/80mm throttle/2JZGE CAS/etc/etc

2JZGTE complete bottom end 8.5-1, done approx 80k kms, brand new Genuine Toyota Oil Pump & Water pump etc. Has made over 400rwkw $1600

http://www.trademe.co.nz/Members/Listin ... ber=322548
Brendan,

Convert Ltd/Niteparts NZ

gtivvl
Member
Member
Posts: 225
Joined: Fri Oct 14, 2011 8:56 pm

Re: JZX100 Tourer V & 2JZ bits

Post by gtivvl »

could the 2jzge turbo manifold be used with a 1jzge?

nite b
Member
Member
Posts: 52
Joined: Mon Apr 11, 2011 3:38 pm
Location: N.Shore, Auckland

Re: JZX100 Tourer V & 2JZ bits

Post by nite b »

Hmm, possibly a non vvti one. Dont think will work with jzx100 n/a engine..
Brendan,

Convert Ltd/Niteparts NZ

gtivvl
Member
Member
Posts: 225
Joined: Fri Oct 14, 2011 8:56 pm

Re: JZX100 Tourer V & 2JZ bits

Post by gtivvl »

could you post pics of it so i can see if it does?

FLAWLES
Member
Member
Posts: 366
Joined: Fri Jan 07, 2011 9:46 pm

Re: JZX100 Tourer V & 2JZ bits

Post by FLAWLES »

vvti 1jzge and vvti 2jzge have the same exhaust paterns/lay out

non vvti 1jz/2jzge manifolds have a differnt set up to the vvti engines

vvti to vvti = will work
non vvti to non vvti = will work
non vvti to vvti = will not work
curb |kərb| kerb
noun
1 a stone or concrete edging to a street or path.
2 a check or restraint on something
3 a concrete construction used to help rotate your car
4 a tempting shortcut

gtivvl
Member
Member
Posts: 225
Joined: Fri Oct 14, 2011 8:56 pm

Re: JZX100 Tourer V & 2JZ bits

Post by gtivvl »

in that case i offer $200 for the 2jz-ge manifold

nite b
Member
Member
Posts: 52
Joined: Mon Apr 11, 2011 3:38 pm
Location: N.Shore, Auckland

Re: JZX100 Tourer V & 2JZ bits

Post by nite b »

No sweat, Ill keep it in mind.
Brendan,

Convert Ltd/Niteparts NZ

XQZIT X90
Member
Member
Posts: 80
Joined: Tue Jan 25, 2011 3:14 pm
Location: Auckland!

Re: JZX100 Tourer V & 2JZ bits

Post by XQZIT X90 »

hey man Lee SAS here im keen as on getting that sub frame off you can you take it down off trade me

also what would it cost to get you to install the rear subframe for me?

also do either of the bushes need replacing?


thanks and regards Lee
S.A.S. Suspension and autoparts specialists for all your under-car needs call 09 444 1390 and ask for Lee

nite b
Member
Member
Posts: 52
Joined: Mon Apr 11, 2011 3:38 pm
Location: N.Shore, Auckland

Re: JZX100 Tourer V & 2JZ bits

Post by nite b »

No sweat, give me buzz tomorrow.
Brendan,

Convert Ltd/Niteparts NZ

Ventourer
Member
Member
Posts: 62
Joined: Mon Sep 19, 2011 12:47 pm

Re: JZX100 Tourer V & 2JZ bits

Post by Ventourer »

Hey mate, im in milford, can i come and take a look at your wares?
guy 021 646789

Post Reply